Prepare your color for smooth, wet-look, craze-free pours by lowering viscosity and increasing flexibility.
Liquitex Gloss Pouring Medium gives even poured puddles and acrylic skins – results in a smooth surface, with no crazing, cracking or bubbles.
It dries to a high gloss, wet-look finish and maintains color opacity, paint adhesion, durability and archival quality.
It also extends your color further without affecting acrylic stability and lowers viscosity of heavier body paints, giving increased flow.

How to use it:

• Fully intermixable with all Liquitex products.
• For best pours, start with with a tablespoon of color to a cup of Pouring Medium (around 5% color to 95% medium) and adapt to suit your technique.
• To use with liquid Acrylic Ink or thicker Heavy Body Acrylic, adjust ratio to get your desired consistency.
• Stir gently to avoid creating foam – if bubbles appear, leave it to sit while the bubbles rise and disappear.
• Use as a regular fluid medium extender – mix as much as you like into acrylic color to create the volume and viscosity you want.
• Crazing and cracking can occur when the flow heights are very uneven so ensure your poured surface is level when drying.
• To achieve a matte-look pour, a final application of Matte Spray Varnish over a dry Pouring Medium pour will give a smoother, more fluid result than using a matte paint or medium.

How not to use it:

• Do not shake or vigorously over-stir as this can impact the smooth appearance when dry.
• Do not use with any non-acrylic media.